Allen-Bradley Bulletin 1609 User Manual download pdf (Page 8)

8 Rockwell Automation Publication 1609-UM009C-EN-P - February 2015

Bulletin 1609 UPS

Battery Wiring and

Installation (cont.)

4. Fold the battery container and seal it with tape.

5. To connect the batteries to the UPS, insert the batteries into the battery

compartment, open the white connector retainer and connect the two

cables together as shown in the photo below.

6. To complete the battery installation, close the white connector

retainer and reattach the battery door with the three screws

(torque of 8.7+/-1.7 lb-in).

Mount the UPS

The UPS-D is designed to mount on the back of the panel or to the floor of the

enclosure. The UPS mounts to a bracket assembly (1609-BRK) that allows it

to mount to either the panel or floor (see Figure 1 below).

Figure 1 - Mounting the UPS

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 34 35

No comments

Allen-Bradley Bulletin 1609 User Manual Page 8