Allen-Bradley Bulletin 1609 User Manual download pdf (Page 11)

Rockwell Automation Publication 1609-UM009C-EN-P - February 2015 11

Bulletin 1609 UPS

1609-B Installation Instructions

Battery Wiring

and Installation

Note: Batteries are not included with the 1609-B UPS

1. To access the battery compartment remove the three screws and the

battery door.

2. Remove the battery container, jumpers, and wire harness from the battery

compartment. Place the battery container and batteries onto a flat surface.

Use the provided jumper wires to connect the batteries in series. Connect

the positive terminal (red) of the battery to the negative terminal (black)

of another battery. Connect the red wire of the harness to the positive

terminal (top red) and the black wire of the harness to the negative

terminal (bottom black). See photo below for details.

3. Fold the battery container and seal it with tape.

ATTENTION: Disconnect the 1609-SPD before servicing, due to electric shock

hazard for risk of severe injury or death.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 34 35

No comments

Allen-Bradley Bulletin 1609 User Manual Page 11