Allen-Bradley Bulletin 1609 User Manual download pdf (Page 33)

Rockwell Automation Publication 1609-UM009C-EN-P - February 2015 33

1609 UPS Dimensions Appendix A

Service Instructions

If the UPS requires service, do not return it to the distributor. Follow these steps:

1. Servicing of batteries should be performed or supervised by personnel

knowledgeable of batteries and the required precautions. Keep

unauthorized personnel away from batteries.

2. When replacing batteries, replace with the same number of the 1609

battery packs supplied by Rockwell Automation.

3. Review the problems discussed in the Troubleshooting section of this

manual to eliminate common problems.

4. If the problem persists, contact Rockwell Automation Customer Support

at 440-646-5800.

5. Pack the UPS in its original packaging.

– Pack the UPS properly to avoid damage in transit. Never use Styrofoam

beads for packaging.

– Damage sustained in transit is not covered under warranty.

The following precautions should be observed when working on batteries:

• Remove watches, rings, or other metal objects.

• Use tools with insulated handles.

• Do not lay tools or metal parts on top of batteries.

• Determine if battery is inadvertently grounded. If inadvertently grounded, remove

source from ground. Contact with any part of a grounded battery can result in

electrical shock. The likelihood of such shock can be reduced if such grounds are

removed during installation and maintenance.

WARNING: Do not dispose of battery in a fire. The battery may explode. Do not

open or mutilate the battery or batteries. Released electrolytes are harmful to

the skin and eyes. It may be toxic. A battery can present a risk of electrical shock

and high short circuit current.

ATTENTION: Always disconnect the battery(s) before shipping, in compliance

with U.S. Department of Transportation (DOT) and IATA regulations. The

battery(s) may remain in the UPS.

1 2 ... 28 29 30 31 32 33 34 35

No comments

Allen-Bradley Bulletin 1609 User Manual Page 33